Mesh not completed when SEGMENT_LEVELED_MOVES is enabled.
It continues to spin the ball cursor and say Probing... even when the printer is done probing. Waited several minutes and eventually cancelled. When looking at the bed, part of the grid is blank. It does this no matter how many grid points I use (3, 4 or 5). If I execute a bed level from the LCD (even after cancelling the waiting ABL Expert Plugin prompt), it will complete successfully then and ABL Expert Plugin will pop up the corrected offsets.
Recv: Bilinear Leveling Grid:
Recv: 0 1 2 3
Recv: 0 +0.741 +0.282 -0.162 -0.504
Recv: 1 +0.829 +0.365 -0.115 -0.529
Recv: 2 +0.781 +0.312 -0.183 -0.563
Recv: 3 +0.711 +0.250 -0.258 -0.655
Recv:
Recv: Subdivided with CATMULL ROM Leveling Grid:
Recv: 0 1 2 3 4 5 6 7 8 9
Recv: 0 +0.74100 +0.58765 +0.43430 +0.28250 +0.12952 -0.02191 -0.16200 -0.28372 -0.39411 =======
Recv: 1 +0.77517 +0.62174 +0.46831 +0.31520 +0.15942 +0.00396 -0.14187 -0.27177 -0.39204 =======
Recv: 2 +0.80933 +0.65583 +0.50232 +0.34791 +0.18933 +0.02983 -0.12174 -0.25982 -0.38997 =======
Recv: 3 +0.82850 +0.67480 +0.52109 +0.36550 +0.20433 +0.04128 -0.11450 -0.25752 -0.39326 =======
Recv: 4 +0.82348 +0.66921 +0.51494 +0.35828 +0.19474 +0.02881 -0.12848 -0.27058 -0.40404 =======
Recv: 5 +0.80346 +0.64850 +0.49355 +0.33594 +0.17025 +0.00192 -0.15535 -0.29330 -0.42018 =======
Recv: 6 +0.78100 +0.62583 +0.47067 +0.31250 +0.14506 -0.02539 -0.18300 -0.31822 -0.44061 -0.56300
Recv: 7 +0.75946 +0.60493 +0.45040 +0.29224 +0.12365 -0.04857 -0.20765 -0.34361 -0.46642 -0.58924
Recv: 8 +0.73548 +0.58207 +0.42865 +0.27087 +0.10154 -0.07217 -0.23307 -0.37120 -0.49654 -0.62187
Recv: 9 +0.71150 +0.55920 +0.40691 +0.24950 +0.07943 -0.09576 -0.25850 -0.39880 -0.52665 -0.65450
Recv:
Recv: X:218.00 Y:198.00 Z:13.67 E:0.00 Count X:17440 Y:15840 Z:5208
Edited by vampyrex13