core issueshttps://framagit.org/hubzilla/core/-/issues2023-04-27T14:03:27Zhttps://framagit.org/hubzilla/core/-/issues/1747#tags appearing as #ags elsewhere, use of id versus href2023-04-27T14:03:27Zjayrope#tags appearing as #ags elsewhere, use of id versus hrefIn https://github.com/mastodon/mastodon/issues/24620 I've reported, that #tagnames sent from Hubzilla 8.2 appear as #agnames in Mastodon, loosing the first letter after the #.
The dev on the thread went through an example post thorough...In https://github.com/mastodon/mastodon/issues/24620 I've reported, that #tagnames sent from Hubzilla 8.2 appear as #agnames in Mastodon, loosing the first letter after the #.
The dev on the thread went through an example post thoroughly and notes:
"spec-wise at a glance, i noticed each Hashtag incorrectly has an id instead of an href. since Hashtag is a subtype of Link, this is technically invalid. not necessarily the cause of this issue though; just something that should be reported to Hubzilla".
So i am reporting this here, too.
If this thread should be in addon/Pubcrawl instead I'd appreciate, if you could move it. Thank you.
---
Hubzilla 8.2, Apache 2.5.56, PHP 8.1.16https://framagit.org/hubzilla/core/-/issues/1734Empty page seen on site/pubstream with latest Hubzilla2023-03-28T22:37:49ZrhisssEmpty page seen on site/pubstream with latest HubzillaIntroduction :
Basically I am using Hubzilla in this way
- my site has free acccess
- default post shows open padlock, that is, share with public
- site url defaults to site/pubstream and I have already installed app: pubstream
- pubstre...Introduction :
Basically I am using Hubzilla in this way
- my site has free acccess
- default post shows open padlock, that is, share with public
- site url defaults to site/pubstream and I have already installed app: pubstream
- pubstream shows the site-only posts and not posts from other sites
Not checking the "federation" part right now but checking it as a self-contained social network where even non-registered user, on visiting the homepage, can see publicly shared texts without logging in. I was highly satisfied with how Hubzilla was doing this (as well as Streams, although there were many issues and wrinkles personally for me). However, with latest versions of Hubzilla (as well as Streams) & fresh installs & php8x, I am seriously set back as I find mail and pubstream not working (both in latest Hubzilla and Streams)
Issues :
With latest (master) Hubzilla : pubstream is not seen. This is super fresh install and php 8x and no extra add-on/apps etc - just default installation and set-up. Since latest Hubzilla seems to (I may be wrong) tries to make posts Friends only (closed padlock as default rather than open one in previous versions) I have explicitly made posts public but still pubstream shows empty page.
With Hubzilla core-6.0RC (php 7.4) - Pubstream is seen fine and there is NO problem.
There is NO nginx and both the latest Hubzilla and the previous Hubzilla (for example core-6.0RC) uses the SAME SERVER SET-UP AND SAME everything.https://framagit.org/hubzilla/core/-/issues/1570Local Directory shows deleted channels helping to spread SEO spam2021-06-27T09:14:02Zivan zlaxLocal Directory shows deleted channels helping to spread SEO spam`/directory` page shows deleted channels.
For example: https://ussr.win/directory
![2021-05-21-112716_2646x1024_scrot](/uploads/9268a1b776e83edd665978ebde18b101/2021-05-21-112716_2646x1024_scrot.png)
This channels was deleted by admin...`/directory` page shows deleted channels.
For example: https://ussr.win/directory
![2021-05-21-112716_2646x1024_scrot](/uploads/9268a1b776e83edd665978ebde18b101/2021-05-21-112716_2646x1024_scrot.png)
This channels was deleted by admin but they are shown in the directory listening. It used by SEO spammers for distribution of their SEO links (possibly with illegal, fraudulent content or pornography)
This spam channels was deleted via /admin/channels web interface. There is no these channels in /admin/channels list. But they are appears in /directory
Please make that only those channels that are present in /admin/channels are displayed in the directory. Or add an option to manually clear deleted channels from the directory. At the moment the directory page helps spammers spread their SEO links.https://framagit.org/hubzilla/core/-/issues/1561can´t add a guest to a group2021-04-22T06:12:31ZRockycan´t add a guest to a groupif would be nice if the Guest Token App would work with the group App - right now we can´t add a guest to a groupif would be nice if the Guest Token App would work with the group App - right now we can´t add a guest to a grouphttps://framagit.org/hubzilla/core/-/issues/1395server not respond2019-11-15T10:18:21ZDmitry Rzhevskiyserver not respondserver not respond ( "Unable to connect" from browser)
In log many lines:
[Sat Sep 21 04:47:47.258562 2019] [:error] [pid 25100] [client ::1:50338] PHP Warning: session_write_close(): Failed to write session data (user). Please verify...server not respond ( "Unable to connect" from browser)
In log many lines:
[Sat Sep 21 04:47:47.258562 2019] [:error] [pid 25100] [client ::1:50338] PHP Warning: session_write_close(): Failed to write session data (user). Please verify that the current setting of session.save_path is correct (/var/lib/php/sessions) in Unknown on line 0
[error.log.1](/uploads/2cab1978e69acf1c31d8b41de2096f20/error.log.1)
after reboot server work correctlyhttps://framagit.org/hubzilla/core/-/issues/1363Public CalDAV export2021-04-22T06:28:20ZKLWPublic CalDAV exportIt would be nice with an extra "public export" function for the CalDAV addon. For example by passing an extra supplied token. I need this for MagicMirror on a Raspberry PiIt would be nice with an extra "public export" function for the CalDAV addon. For example by passing an extra supplied token. I need this for MagicMirror on a Raspberry Pihttps://framagit.org/hubzilla/core/-/issues/1351TOTP app is disable channel access2019-03-14T10:54:24Zivan zlaxTOTP app is disable channel accessSome users suddenly enabled TOTP app and couldn't disable it or return access to their accounts.
I tried to do it on channel level too, but failed.
I had to disable it at the level of the administrator.Some users suddenly enabled TOTP app and couldn't disable it or return access to their accounts.
I tried to do it on channel level too, but failed.
I had to disable it at the level of the administrator.https://framagit.org/hubzilla/core/-/issues/1303problem with startpage addon2023-01-15T17:21:12Zgia vecproblem with startpage addonthe little window/form that is opened when we click in "enter" ( in a hub default page) does not respect the startpage addonthe little window/form that is opened when we click in "enter" ( in a hub default page) does not respect the startpage addonhttps://framagit.org/hubzilla/core/-/issues/1252siteinfo: duplicate values for ActivityPub and OStatus2018-10-08T09:27:32ZHappy Ponysiteinfo: duplicate values for ActivityPub and OStatusthe line Additional federated transport protocols: contains duplicate of `ActivityPub` and `OStatus` strings here https://tiksi.net/siteinfo . Hub https://project.hubzilla.org/siteinfo shown't this behaviour. Both hubs implements version...the line Additional federated transport protocols: contains duplicate of `ActivityPub` and `OStatus` strings here https://tiksi.net/siteinfo . Hub https://project.hubzilla.org/siteinfo shown't this behaviour. Both hubs implements version 3.6.https://framagit.org/hubzilla/core/-/issues/1165problems with clone2018-10-10T10:48:03ZMarioproblems with clone*Created by: elvecio*
Currently I can not finalize a new connection when I'm using the clone (try entering the page of the new connection). It force myself to use the original channel.*Created by: elvecio*
Currently I can not finalize a new connection when I'm using the clone (try entering the page of the new connection). It force myself to use the original channel.https://framagit.org/hubzilla/core/-/issues/1068autosave: comments, open comment box2018-06-05T14:19:46ZMarioautosave: comments, open comment box*Created by: zotlabs*
This is low priority, but when recovering a saved comment maybe the comment box could be opened to make it obvious that there is saved content available. *Created by: zotlabs*
This is low priority, but when recovering a saved comment maybe the comment box could be opened to make it obvious that there is saved content available. https://framagit.org/hubzilla/core/-/issues/764wrong URL's in cloned webpages2018-06-05T14:19:47ZMariowrong URL's in cloned webpages*Created by: HappyPony*
I cloned one Profil from Hub H1 with Hubzila Version 2.2 to Hub H2 with Version 2.3.2. The 'old' webpages from H1 are also cloned. But the in webpages contains images are on Hub H2 not displayed.
I see, that t...*Created by: HappyPony*
I cloned one Profil from Hub H1 with Hubzila Version 2.2 to Hub H2 with Version 2.3.2. The 'old' webpages from H1 are also cloned. But the in webpages contains images are on Hub H2 not displayed.
I see, that the image URL on Hub H2 is so:
_[baseurl-hub-h2]/[image-path-from-hub-h1]_. But this image isn't cloned and this image exist not at Hub H2. I mean, that this URL at Hub H2 _[baseurl-hub-h2]/[image-path-from-hub-h1]_ is in this context wrong.https://framagit.org/hubzilla/core/-/issues/759watch-utility for sync-complete2018-06-05T14:19:47ZMariowatch-utility for sync-complete*Created by: HappyPony*
One watch-utility for review, above sync-complete. I suggest, when synchronization to chec above count of webpages on original-profil accord with the count of webpages on clone-profil. Because now and then sync...*Created by: HappyPony*
One watch-utility for review, above sync-complete. I suggest, when synchronization to chec above count of webpages on original-profil accord with the count of webpages on clone-profil. Because now and then synchronisation has failed.
For example I cloned my hub.freecommunication.org-`nmoplus` -Profil on `hub.libranet.de` -Hub at moment `xyz`. After Login on https://hub.libranet.de are for me yet only these webpages available, these I modify on the `hub.freecommunication.org` after the time `xyz`. Is it a bug or feature, that not all webpages from hub.freecommunication.org-`nmoplus` -Profil are available for the hub.libranet.de -clon?
Hubzilla-Version:
hub.freecommunication.org - 2.0.6
hub.libranet.de - 2.2
s. also [not all webpages from original -Profil are available for the clon](https://hub.freecommunication.org/channel/nmoplus/&f=&mid=fd2f0eaea5f4ddc1b20ce0801828f5579f5a5b0ed811753d413e4fe08e4f782c@hub.freecommunication.org)
https://framagit.org/hubzilla/core/-/issues/190Bug Installation with http2018-06-05T14:20:00ZMarioBug Installation with http*Created by: royalterra*
Today I observe new installations can be done with not https
https://blablanet.com/display/d066fd31d2f371f351368a25362d409f128676c90077360b644696734c9b3353@blablanet.com?
There also now in the queue many serve...*Created by: royalterra*
Today I observe new installations can be done with not https
https://blablanet.com/display/d066fd31d2f371f351368a25362d409f128676c90077360b644696734c9b3353@blablanet.com?
There also now in the queue many servers with http